Window Replacement in Washington NC That Ends Drafts, Fogged Glass, and Sticking Windows
Do your windows whistle when the river wind picks up? Is there fog trapped between the panes, or a sash you have to force open with both hands? Prado’s Home Improvement installs and replaces windows and doors across Washington NC, and we check the opening behind the unit, not just the unit itself. Most drafts and leaks start in the opening, where old flashing and worn seals let air and water slip in. For window replacement Washington NC homeowners can count on, start with a free in home estimate.
- Trusted by more than 1,000 Clients/Home owners Across Eastern North Carolina
- Insured
- 15+ Years of Experience
- Free Estimates
- Locally Owned, Belhaven-Based
- Install, Replace & Repair
Which Windows and Doors Can We Replace or Install in Your Washington Home?
We replace worn and drafty units and install new ones in remodels and additions. Every job includes checking, flashing, and sealing the opening, because a new unit in a bad opening still leaks.
Replacement Windows, Measured to Your Opening
New Window Installation for Remodels and Additions
Entry and Front Door Replacement
Patio, Sliding Glass, and French Doors
Storm Doors and Screen Doors
Window and Door Repair When the Unit Is Still Sound
Interior door installation is a regular finish item on Washington remodels, alongside entry doors and storm doors.
How Do You Know Your Windows Are Costing You Money?
Some signs are easy to live with for years while they drain your wallet and let water into the wall. Here is what we look for.
Fog or Moisture Between the Panes
Drafts, Cold Spots, and Rising Power Bills
Rot, Soft Wood, or Water Stains at the Frame
Window work often pairs with siding renewal, and we also install fiber cement and vinyl siding in Washington NC.
Windows and Doors That Stick or Will Not Latch
Single Pane Glass and Storm Damage
How Does a Window Replacement Project Run, From Measurement to Final Seal?
The unit matters, but the opening decides whether it leaks. Here is how we work, in order.
Step 1. We Measure the Opening and Check the Frame
We look at the opening, sill, and frame condition first, and measure for a true fit.
Step 2. You Choose the Style and Material
We help you pick the window or door type, material, and glass that fit your home and how you use the room.
Step 3. We Remove the Old Unit With Care
We take out the old unit without tearing up the wall and trim around it.
Step 4. We Set the New Unit Level, Plumb, and Square
A unit set true opens, closes, and latches the way it should.
Step 5. We Flash and Seal the Opening
We flash, seal, and weatherproof the opening itself. This is the step that keeps water and rot out for the long run.
Step 6. We Insulate and Finish the Trim
We insulate the gaps around the unit and finish the interior and exterior trim.
Step 7. We Test, Clean Up, and Walk It Through With You
We test every sash and latch, clean up, and review the finished job with you.
What Do Washington NC Windows and Doors Have to Stand Up To?
Washington sits on the Pamlico River. Humidity, wind driven rain, and storm seasons test every seal on the home. The downtown Historic District has been on the National Register since 1979 and holds more than 500 contributing buildings, many from the 1800s and early 1900s. Those homes often have tall openings, old trim, and frames settled over a century, so new units must be fitted with care, not forced in. Homes near the river and in low lying parts of town also sit in or near FEMA flood zones. That is why we flash and seal every opening and fasten to the wind load requirements for coastal Beaufort County. The North Carolina building code calls for proper flashing and a water resistive seal at every opening, and we build to that standard on every job. That standard is what window replacement Washington NC homes near the water actually need.
- Flashing at every opening
- Wind load fastening
- Fitted to older openings
Why Do Washington Homeowners Trust Us With Their Windows and Doors?
Homeowners here choose us for reasons that show up in the finished opening.
One insured local team that installs, replaces, and repairs
Owners Johan Prado and Kevin Prado, with 15+ years of construction and home improvement experience
Flashing and sealing at every opening, not just caulk at the surface
Real experience with older Washington homes and out of square openings
Honest repair or replace advice, even when repair is the smaller job
Free estimates, a tidy jobsite, and a final check with you before we leave
Prado’s Home Improvement handles the whole opening, from the first measurement to the final seal, and our window and door work is backed by a workmanship warranty on new installs.
What Washington NC Homeowners Say About Our Work
Which Washington NC Areas and Nearby Towns Do We Serve?
We are based in Belhaven and work across Washington NC, from the downtown and waterfront streets to Washington Park, and across the Beaufort County towns around it. Kitchens, baths, decks, and full remodels are handled by the same home improvement contractor serving Washington NC.
From our home base, homeowners also call us for window replacement in Belhaven NC.
- Washington NC
- Washington Park
- Downtown Washington
- ZIP 27889
- Chocowinity NC
- Bath NC
- Belhaven NC
- Blounts Creek NC
- Aurora NC
- Grimesland NC
Window and Door Questions Washington NC Homeowners Ask Us
Should I repair or replace my windows?
Repair makes sense for a single lock, seal, or glass problem on a unit and frame that are still sound. Replacement makes sense when a unit keeps failing, fogs between the panes, leaks, or wastes energy. We check the opening with you and give you the honest answer.
Can foggy glass between the panes be fixed?
Yes, in many cases. Fog means the insulated glass seal has failed. On some windows the glass unit alone can be replaced. On others the whole sash or the whole window is the smarter fix. We confirm which one fits when we see the window.
What types of windows and doors do you install?
Single hung, double hung, casement, sliding, picture, and awning windows in vinyl, wood, fiberglass, or aluminum. For doors, we install entry, front, patio, sliding glass, French, interior, and storm doors in steel, fiberglass, or wood.
Can you fit the odd sized openings in older Washington homes?
Yes. Homes in the Historic District and the older parts of town often have openings that are tall, narrow, or out of square. We measure the actual opening and fit the unit to it, and we protect the original trim whenever we can.
How much does window replacement in Washington NC cost?
It depends on the number of windows, their sizes, the material and glass you choose, and the condition of the openings. Prado’s Home Improvement gives free in home estimates in Washington NC, so you get a clear written number before any work starts.
Ready to Shut Out the Drafts for Good?
Tell us which windows fog, stick, or leak, and we will measure them and explain your options in plain language. Call Prado’s Home Improvement at (252) 402-4827, or request your free estimate online today.
- Serving Washington & Eastern NC
- Insured
- Free Estimates
Tell us about your project
We reply within one business day with a free, no-pressure estimate.